HOME / PRODUCT / CNC Lathe / 14NC1440NC
MODEL

CNC LATHE (Flat-bed type)

Model: 1440NC

 

FEATURES:

˙FANUC, FAGOR, SIEMENS, SYNTEC control are available.

˙CNC and manual operation.

˙Electronic hand-wheels for manual turning.

˙Teach in mode.

˙Integrated PLC.

˙Semi-automatic, automatic (cycle) and part program modes.

˙Rapid traverse.

˙Automatic home searching.

˙30-2000 R.P.M. infinite variable spindle speed.

˙38mm. 1-1/2inch hole through spindles.

˙2-point supported spindle using 2 precision taper roller bearings.

˙All geared headstock, main gears are made from Chromium, Nickel, molybdenum alloy steel and are case hardened and “REISHAUER” ground.

˙Forced spray lubrication system used for headstock.

˙High precision ball-screws.

˙Hardened of bed-way & cross ways meet HB 450.

˙Auto lubrication unit for all slide-ways surface and ball-screws.

˙5HP 3.5KW Main motor or 7.5HP 5.7kw main servo motor.

 

HEADSTOCK

˙The headstock is made of high quality cast iron (FC30) all shafts and gears are of high tensile tensil steel and are hardened and ground.

˙3 spindle speeds 30-2000 rpm. Low speed provides High torque output for heavy duty cutting. Hi speed is for finish cutting.

˙Hardened and ground main spindle is supported by precision taper roller bearing.

˙Headstock have inner oil reservoir in which lubrication worked by splashing lubricant.

 

BED WAY

˙Meehanite cast iron bed is heavily ribbed.

˙The bed ways are induction hardened to HS70 and precision ground.

 

CARRIAGE

˙Automatic lubrication system continuously supplies lubricating oil to carriage and cross-slide.

 

TAILSTOCK

˙Tailstock is of rigid construction and features super tight clamp locked by clamp lever.

˙M.T. #3 barrel internal taper provides heavy support for live centers or tip center.

˙The quill is hardened and ground with inches and metric graduations.

 

pElectrical box

 

pChip tray

Easily to remove the chip front of the lathe.

 

pOPERATOR BOX (OPTIONAL)

- Dual hand wheels in front of CNC lathe easily to control in manual mode.

- Operator box can move smoothly.

pElectrical 4 way toolpost (OPTIONAL)

pHydraulic Tailstock

pQuick change tool post

 

STANDARD ACCESSORIES:

   1.     CNC control system.

   2.     3 Jaw chuck 6 inch (165mm) with backplate.

   3.     Manual Quick change tool post.

   4.     Steady rest

   5.     Automatic lubrication system

   6.     Coolant pump system

   7.     Electrical hand wheel

   8.     Work lamp

   9.     Signal lamp

10.     Safety guard

11.     Toolbox with tools.

12.     Center sleeve

13.     Two dead centers

14.     Camlock spindle wrench.

15.     Oil gun

16.     Optional manual and part list

 

OPTIONAL ACCESSORIES:

   1.     3-jaw strong scroll chuck

   2.     4-jaw independent chuck

   3.     Face plate

   4.     Follow rest

   5.     Electrical 4 way tool post

   6.     Live center M.T.#3.

   7.     Drilling chuck ½in. (13mm)

   8.     Hydraulic chuck system 3 jaw 6" chuck

   9.     Hydraulic tailstock

10.     Transformer

11.     CE Standard Equipment

 

MODEL

BRIEF SPECIFICATION

MODEL

1440NC

NOMINAL SIZE

Swing over Bed 

356mm    14in

High of center 

   176mm    6-7/8in

Swing over Cross Slide 

 172mm    6.7in

Distance Between Centers 

1000mm   40in

Width of Bedways 

206mm   8-1/2in

SPINDLE

Number of spindle speeds 

3 / 1(Opt.)

Speed range

HI 

2000~410 RPM

30-2000RPM

Servo motor(Opt.)

MID 

540~110 RPM

LO 

140~30 RPM

Hole through spindle 

38mm  1-1/2in

Spindle nose 

D1-4  CAMLOCK

Taper of spindle bore 

M.T.#5

TAIL STOCK

Total travel of tailstock barrel 

100mm  3-15/16in

Taper in tailstock barrel 

M.T.#3

Diameter of barrel 

Dia.  45mm  1-3/4in

X-axis

Travel

203mm  8in

Rapid travel

6m/min

Ballscrew Dia. 

25mm Pitch5

Max servo force 

6.3Nm

Z-axis

Travel 

840mm  33-1/2in

Rapid travel

8m/min

Ballscrew Dia. 

32mm Pitch5

Max servo force 

6.3Nm

TOOLPOST

Number of tools 

4T

Shank Tool

20 mm

Cutting Distance 

800~950mm

ELECTRICAL EQUIPMENT

Main spindle motor 

5HP motor 3.5KW /Servo motor 7.5HP 5.7KW(Opt.)

Axis servo motor 

Servo motor 1.6HP 1.2KW

Auto lubrication 

3L 220V

Coolant pump 

1/8HP 220V

PACKING SIZE

SPACE 

2070 X 1360 X 1683mm

PACKING SIZE 

 2300 x 1460 x 2120mm

Machine net weight 

1200 kg

Gross weight 

1300 kg

We reverse the right to modify and improve our products.

Copyright 2016 © GOSAN MACHINERY CO., LTD | e-Giant, B2B Global-Trade, Global Machine, Global Bicycle, HiGo Shopping.